Sanders & Planers

 

Voltage:                                     220 V

Rated power input:                   750 W

Sanding surface, width:             75 mm

Belt, length:                             533 mm

 

 

Application:

 

Extremely handy for removing, surface sanding, smoothing and cleaning 

on wood, plastic and metal

 

Voltage:                            220 V

Rated power input:        330 W

Sanding plate, width:    114 mm

Sanding plate, length:   226 mm

 

Application:

 

For sanding

on flat and curved surfaces

where a high rate of removal

is required

 

Power: 230V

Power input:1120W

Belt width: 200mm

Weight: 42kg

 

Application

 

Before you hire the machines spend some time counter sinking the nails and do any repairs that might be necessary.

 

Use the main floor sander first to do the bulk of the area working with the grain of the wood. On very uneven floors you can sand diagonally first to rapidly level the floor.

There are 4 grades of sanding paper. Work down the grades to get a good finish. We supply you with plenty of abrasives. Use what you want and return any unused ones.

 

Finish by doing the edges blending in the sanding marks.

It’s very important to vac all the dust up. Use a crevice tool on your vacuum to get all the dust from the joints. A tacky duster is the best way to remove final traces of dust.

 

On softwood 3 coats of floor finish will be required. We sell both water and spirit base finishes in matt or gloss.

Specification:

 

Continuous rating input: 620W

Planing Width: 82mm

Planing Depth: 2.5mm

No load Speed: 17000r/min

Overall length: 285mm

Net weight:        2.6kg

Power supply cord: 2.5m

 

Application: